Build Your Own Cocktail Machine
Why Go DIY?
Full Control
Design and build your machine exactly how you want it. Choose your own components, frame, and layout.
Cost-Effective
Build a complete cocktail machine for €200–€500 in parts. No subscription required with the free Community license.
Learning Experience
Gain hands-on experience with electronics, Raspberry Pi, and real-time software. A great project for makers and students.
Community Support
Join a community of builders sharing designs, tips, and modifications. Open-source software you can extend.
What You'll Need
Raspberry Pi 4 or 5
The brain of your machine. Runs the Cocktail-O-Matic software, drives the touchscreen UI, and controls all hardware.
Peristaltic Pumps
Food-safe DC or stepper peristaltic pumps for precise liquid dispensing. Up to 6 pumps on the Community license.
Relay Board / GPIO Expander
MCP23017 I2C expander or relay modules to control pump power. Scales from 6 to 40+ channels.
Food-Safe Tubing & Fittings
Silicone tubing, barb fittings, and check valves. Food-grade materials for safe liquid handling.
Power Supply
12V or 24V DC power supply depending on your pump choice. Adequate wattage for all pumps running simultaneously.
Frame / Enclosure
Wood, metal, acrylic, or 3D-printed. Design your own or use community-shared plans and templates.
Getting Started
Gather Hardware
Source the components from our recommended parts list. Most items are available on Amazon or electronics suppliers.
Install Software
Flash your Raspberry Pi, run the one-line installer, and the Cocktail-O-Matic software is ready in under 15 minutes.
Configure & Calibrate
Connect your pumps, assign ingredients, and calibrate flow rates using the built-in admin interface.
Start Mixing
Create recipes, invite friends, and let your machine serve cocktails. Upgrade to Pro anytime for more features.
Resources
Documentation
Step-by-step setup guides, wiring diagrams, and troubleshooting tips to get your machine running.
Documentation →GitHub Repository
Full source code, issue tracker, and contribution guidelines. Fork, customize, and contribute back.
GitHub Repository →Community Forum
Connect with other builders, share your builds, ask questions, and get help from the community.
Community Forum →